Linux
Linux commands and FAQ
StorCLI (former MegaCLI) allows us to manage and control LSI MegaRAID controllers. This command allows administering the MegaRAID controller. List a...
Wed, 4 Nov, 2020 at 8:56 PM
Accessing the local Linux MegaRAID Storage Manager server on a IAP from a remote client For this process, you will remotely launch a single GUI applicat...
Wed, 14 Dec, 2022 at 5:47 PM
Creating Show Connections Use this command to locate the device number of the NICs you want to bond. nmcli connection Create the bond Use the command...
Thu, 12 Sep, 2024 at 4:52 AM
systemctl set-default multi-user.target yum install kernel-devel* yum install libglvnd* Add blacklist nouveau to /etc/modprobe.d/blacklist.conf dracut -...
Thu, 9 Jun, 2022 at 10:13 AM
There is a utility installed called "ipmiutil". Common commands are: #ipmiutil lan -> Prints the IPMI address and LAN information of the...
Thu, 21 Dec, 2023 at 10:40 AM
Find out the UPS IP address from the DHCP server. (in this how-to : w.x.y.z) Go to the UPS WEB GUI http:// w.x.y.z address: default user name: admin passw...
Tue, 23 Jan, 2024 at 9:54 AM
Sometimes the LSI controllers are not set up for automatic rebuilds. Steps performed via storcli after an improperly removed device: storcli /c0 show to...
Fri, 10 Jan, 2025 at 11:05 AM
1. Create a hidden credentials file in the root directory, vi .smbcred 2. Enter a user, password, and domain if applicable. 3. Enter the following in fs...
Tue, 14 Jan, 2025 at 4:01 PM